STM-1/4 SH 1300nm 15km SFP S4.1

1000BASE-LX/LH SFP Transceiver

1000BASE-BX-U SFP Transceiver

1000BASE-BX-D SFP Transceiver

1000BASE-T, Copper, RJ45 Connector, Pluggable SFP Module, up to 100 meter reach 

1000BASE-SX SFP Transceiver

1000BASE-LX SFP transceiver 

1000BASE-ZX SFP transceiver

1000BASE OC-3/IR-1 SFP Transceiver

1000BASE OC-3/LR-1 SFP Transceiver

1000BASE OC-12MM SFP transceiver

1000BaseSX Gigabit Ethernet transceiver, 850nm, LC connector, up to 2 km on 62.5/125 _m MMF or 550m on 62.5/125 _m MMF

1000BASE OC-12/IR-1 SFP transceiver

Dual Speed (100FX 1000LX) optical transceiver (SFP MSA up to 2km (FX) / 550m (LX))

1000BASE OC-12/LR-2 SFP transceiver

10Dual Speed (100FX 1000LX) optical transceiver (SFP MSA up to 10km (FX and LX))

1000BASE OC-48/SR-1 Transceiver

1000BaseLH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310 nm wavelength (nominal) with an LC connector. Typical reach of 40 Km on 9/125 _m SMF

1000BASE OC-48/IR-1 Transceiver

1000BaseLH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1550 nm wavelength (nominal) with an LC connector. Typical reach of 70 Km on 9/125 _m SMF

1000BASE OC-48/IR-2 Transceiver

1000Base-LX Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310-nm wavelength (nominal) with an LC connector. Typical reach of 10 km on 9/125 _m SMF

1000BASE OC-48/LR-2 Transceiver

1000Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850-nm wavelength (nominal) with an LC connector. Typical reach of 300 m on 62.5/125 _m MMF or 550 m on 50/125 _m MMF

1000BASE-SX SFP Transceiver

1000BaseT Gigabit Ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP only works in 1000 Mbps speed and full-duplex mode

1000BASE-LX SFP Transceiver

1000BaseBX SFP transceiver with an LC type of interface. This bidirectional transceiver is designed for use over single mode fiber optic on a single strand link up to 10 km. Transmits 1490 nm and receives 1310 nm optical signal.

1000BaseBX SFP transceiver with an LC type of interface. This bidirectional transceiver is designed for use over single mode fiber optic on a single strand link up to 10 km. Transmits 1310 nm and receives 1490 nm optical signal.

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ gray latch. Supports single mode fiber over 1470 nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ violet latch. Supports single mode fiber over 1490 nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ blue latch. Supports single mode fiber over 1510 nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ green latch. Supports single mode fiber over 1530 nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ yellow latch. Supports single mode fiber over 1550 nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ orange latch. Supports single mode fiber over 1570 nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ red latch. Supports single mode fiber over 1590 nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ red latch. Supports single mode fiber over 1610 nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.

1000Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20 km. Transmits 1490 nm and receives 1310 nm optical signal.

1000Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 40 km. Transmits 1490 nm and receives 1310 nm optical signal.

1000Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20 km. Transmits 1310 nm and receives 1490 nm optical signal.

1000Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 40 km. Transmits 1310 nm and receives 1490 nm optical signal.

Gigabit SFP transceiver. Supports single mode fiber, 120 km, 1550nm, LC Connector, Digital Diagnostic Monitoring (DDM).

Dual Speed 100Base-BXD or 1000Base-BXD SFP transceiver with an LC type connector. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 10 km. Transmits 1550 nm and receives 1310 nm optical signal.

Dual Speed 100Base-BXU or 1000Base-BXU SFP transceiver with an LC type connector. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 10 km. Transmits 1310 nm and receives 1550 nm optical signal.